AVALON 60 DB is a high performance polyester based thermoplastic polyurethane for injection moulding.
AVALON 60 DB is part of the AVALON Perform Range and offers a premium soling material for sports footwear and top-pieces.
The features offered include :
Durability
Excellent surface definition
Abrasion resistance
Flex resistance
Phthalate free TPU
| Original Document | Technical Datasheet(English) | |||
| Features | DurabilityGood SurfaceWear/Abrasion ResistancePhthalates/Plasticizer free (PAEs) | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 2781 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | |
at 100% strain | *** Mpa | ISO 37 | |
at 300% strain | *** Mpa | ISO 37 | |
Tensile Elongation | |||
Break | *** % | ISO 37 | |
Flexural Modulus | *** Mpa | ISO 178 | 23°C |
Tear Strength | *** kN/m | ISO 34 | Angle |
Compression Set | *** % | ISO 815 | 23°C |
Ross Flex | *** Cycles | BS 5131 | Ross Flex @ -10°C |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
