Two-part gray, thermally conductive encapsulant or adhesive with low viscosity, flame resistance and good working time
FEATURES & BENEFITS
• Mix ratio: 1 to 1 • Highly flowable, self-leveling • Versatile heat cure • Long working time at room temperature • Thermally conductive - provides heat flow away from components • UL 94 V-1 flammability rating
APPLICATIONS
• SYLGARD™ Q3-3600 Thermally Conductive Encapsulant is designed to provide efficient thermal transfer for the cooling of components in automotive and industrial applications.
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantElectrically ConductiveHigh FlowLow viscosity | |||
| Appearance | Gray Color | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | Cured |
Viscosity | *** Pa-s | Internal | Mixed |
Viscosity | *** Pa-s | Internal | Part A or Base |
Viscosity | *** Pa-s | Internal | Part B or Catalyst |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | Internal | |
Tensile Elongation | |||
- | *** % | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Thermal Conductivity | *** W/(m K) | - | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-1 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | Internal | |
Dielectric Strength | *** kV/mm | Internal | |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Adhesion Strength | *** Mpa | - | Unprimed Adhesion - Lap Shear (Al) |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
