Transparent encapsulant with good flame resistance
FEATURES & BENEFITS
•Flowable
• Room temperature and heat cure
• Good dielectric properties
•Rapid, versatile cure processing controlled by temperature
• High transparency allows easy inspection of components
APPLICATIONS
SYLGARD™ 184 Silicone Elastomer is suitable for:
• LED Lighting encapsulation • Power supplies • Connectors • Sensors • Industrial controls • Transformers • Amplifiers • High voltage resistor packs • Relays • Adhesive/encapsulant for solar cells • Adhesive handling beam lead integrated circuits during processing
| Original Document | Technical Datasheet(English) | |||
| Features | Flame Retardant | |||
| Appearance | Clear/Transparent | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | Cured |
Viscosity | *** Pa-s | Internal | Base |
Viscosity | *** Pa-s | Internal | Mixed |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Relative Temperature Index(RTI), Imp | |||
- | *** °C | UL 746 | |
Relative Temperature Index(RTI), Elec | |||
- | *** °C | UL 746 | |
Relative Temperature Index(RTI), Str | |||
- | *** °C | UL 746 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/°C | TMA | |
Thermal Conductivity | *** W/(m K) | - | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | Internal | |
Dielectric Constant(Permittivity) | |||
100Hz | *** - | ASTM D 150 | |
100 kHz | *** - | ASTM D 150 | |
Dissipation Factor | |||
100Hz | *** E-4 | ASTM D 150 | |
100 kHz | *** E-4 | ASTM D 150 | |
Dielectric Strength | *** kV/mm | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Refractive Index | *** - | Internal | 1321 nm |
Refractive Index | *** - | Internal | 1554 nm |
Refractive Index | *** - | Internal | 589 nm |
Refractive Index | *** - | Internal | 632.8 nm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
