Product characteristics
-Glass-reinforced thermoset SMC high-pressure laminate developed for applications at cryogenic temperatures
-Low thermal conductivity and high mechanical strength
Product applications
-Thermal insulation
-Engineering
| Original Document | Technical Datasheet(English) | |||
| Features | Thermal InsulationFilled & Reinforced | |||
| Reinforced | Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | -196℃ |
- | *** Mpa | ISO 527 | Room Temperature |
Flexural Modulus | *** Mpa | ISO 178 | -196℃ |
Flexural Modulus | *** Mpa | ISO 178 | Room Temperature |
Flexural Strength | |||
- | *** Mpa | ISO 178 | -196℃ |
- | *** Mpa | ISO 178 | Room Temperature |
Compressive Strength | *** Mpa | ISO 604 | -196℃, paralle |
Compressive Strength | *** Mpa | ISO 604 | -196℃, perpendicular |
Compressive Strength | *** Mpa | ISO 604 | Room Temperature, paralle |
Compressive Strength | *** Mpa | ISO 604 | Room Temperature, perpendicular |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | TMA | |
Across Flow | *** E-6/K | TMA | |
Thermal Conductivity | *** W/(m K) | - | |
Continuous Use Temperature | |||
Long term | ***~*** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
