DuPont™ Kapton® corona resistant film is a state of the art polyimide film that withstands the damaging effects of corona discharge. The corona resistance provides improved service life and operational efficiencies versus conventional insulation materials.
Kapton® 150FCRC019 is a composite film consisting of Kapton® 100CRC corona resistant polyimide film and a heat fusible FEP fluoropolymer film. In addition to the corona resistant properties, Kapton® FCRC offers excellent, physical, electrical, thermal, and chemical resistant characteristics expected with Kapton® polyimide films.
Kapton® 150FCRC019 has been developed for use as a magnet wire insulation in rail traction, industrial motors and generators where there is a need for enhanced insulation life under partial discharge environments.
Kapton® FCRC may also be used in other electrically insulating applications where partial discharge may occur.
Characteristics
• Corona resistant film
• Heat fusible adhesive
• High dielectric strength
• Reduced thickness versus mica laminates
Applications
• Magnet wire
• Traction motors: rail, auto, mining
• Industrial motor insulation
• Wind, hydro generators
• ESP motors
• High temperature
• High reliability
• Aerospace and specialty wires
| Original Document | Technical Datasheet(English) | |||
| Appearance | Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | 38 µm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Relative Temperature Index(RTI), Elec | |||
- | *** °C | UL 746B | 38 µm |
Relative Temperature Index(RTI), Str | |||
- | *** °C | UL 746B | 38 µm |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | 38 µm |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | 38 µm |
Dielectric Constant(Permittivity) | |||
1 kHz | *** - | ASTM D 150 | 38 µm |
Dissipation Factor | |||
1 kHz | *** E-4 | ASTM D 150 | 38 µm |
Dielectric Strength | *** kV/mm | ASTM D149 | 38 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D882 | 38 µm |
Tensile Elongation | |||
- | *** % | ASTM D882 | 38 µm |
Tensile Modulus | *** Mpa | ASTM D 882 | 38 µm |
Yield Factor | *** m²/kg | Internal | 38 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
