Super-heat resistant polyimide film produced from UBE’s exclusive “BPDA (Biphenyl tetracarboxylic dianhydride)“ monomers.
This formulation is unique to UBE and exhibits outstanding dimensional stability, low water absorption and very high chemical resistance.
In addition to the excellent properties of general polyimide resins (heat resistance, high mechanical properties and excellent electrical insulating properties), UBE’s polyimide film “UPILEX®” has various advantages unique to our formulation.
●High heat resistance--- “UPILEX®-S” can be used in high-temperature processes just below 500°C. This exceeds industry standard operating temperatures around 300°C.
●High mechanical properties--- Upilex has excellent wear resistance and toughness. This allows use of thinner films in applications where strength is critical.
●Chemical resistance--- It has excellent chemical resistance to organic solvents, gasoline, automotive oil, alkalis, acids etc..
●High-performance technology--- The industry leading surface uniformity and smoothness of “UPILEX®” improves performance and adds value to your application.
| 原厂资料 | 物性表(英文) | |||
| 产品特性 | 耐热绝缘尺寸稳定耐化学性耐酸耐碱耐燃油耐油耐溶剂低吸湿性 | |||
| 颜色形状 | 薄膜 | |||
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.47 g/cm³ | ASTM D 1505 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
摩擦系数 | 0.4 - | ASTM 1894 | film-to-film |
撕裂强度 | 470 N/mm | ASTM D 1004 | 25℃ |
耐曲折测试 | 120000 Cycles | ASTM D2176 | 25℃, Folding endurance [MIT] |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
比热容 | 1130 J/kg-K | - | |
线性膨胀系数(CLTE) | |||
- | 20 E-6/°C | Internal | 50-200°C |
导热系数 | 0.29 W/(m K) | Laser flash Method | Thickness direction |
半寿命温差(HIC) | |||
拉伸强度 | 290 °C | Internal | 20,000h |
| 燃烧性能 | 值/单位 | 测试标准 | 测试条件 |
UL 防火等级 | |||
V-0 | - mm | UL94 | |
氧指数(LOI) | 66 % | JIS K 7201 | |
| 电学性能 | 值/单位 | 测试标准 | 测试条件 |
体积电阻率 | 1.0E+14 Ohm-m | ASTM D257 | 200℃, DC 100V |
体积电阻率 | 1.0E+14 Ohm-m | ASTM D257 | 25℃, DC 100V |
表面电阻率 | 1.0E+15 Ohm | ASTM D257 | 200℃, DC 100V |
表面电阻率 | 1.0E+16 Ohm | ASTM D257 | 25℃, DC 100V |
介电常数(DK) | |||
1 kHz | 3.2 - | ASTM D 150 | 200℃ |
1 kHz | 3.3 - | ASTM D 150 | 25℃ |
1MHz | 3.5 - | ASTM D 150 | 25℃ |
耗散因数(DF) | |||
1 kHz | 56 E-4 | ASTM D 150 | 200℃ |
1 kHz | 38 E-4 | ASTM D 150 | 25℃ |
1MHz | 49 E-4 | ASTM D150 | 25℃ |
绝缘强度 | 11 kV/mm | ASTM D149 | 200℃ |
绝缘强度 | 11 kV/mm | ASTM D149 | 25℃ |
| 薄膜性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
- | 270 Mpa | ASTM D882 | 200℃ |
- | 360 Mpa | ASTM D882 | 25℃ |
- | 110 Mpa | ASTM D882 | at 5% elongation, 200℃ |
- | 210 Mpa | ASTM D882 | at 5% elongation, 25℃ |
拉伸延伸率 | |||
断裂(brk) | 80 % | ASTM D 882 | 200℃ |
断裂(brk) | 50 % | ASTM D 882 | 25℃ |
拉伸模量 | 3800 Mpa | ASTM D 882 | 200℃ |
拉伸模量 | 6900 Mpa | ASTM D 882 | 25℃ |
埃尔曼多夫撕裂 | 4.2 N | ASTM D 1922 | 25℃ |
自由/热收缩 | 0.01 % | ASTM D 1204 | 200°C, 2h |
此物性表中的信息由阿技材料库从该材料的生产商处获得。阿技材料库尽最大努力确保此数据的准确性。 但是阿技材料库对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
