This polyolefin based thermoplastic elastomer (SEBS) compound is high mineral filled, completely recyclable and suitable for general purpose applications. ENSOFT® series can be processed with conventional thermoplastics machinery
Additive Packages :
C / Heat and UV stabilizer and fast cycle additive
Key Features :
-Excellent ozone, UV and weathering resistance
-Rubberlike elasticity in a wide temperature range
-Easy colorability with proper MB (PE, PP, etc. based)
| Original Document | Technical Datasheet(English) | |||
| Features | Good ColoringUV StabiltiyWeather ResistanceOzone ResistantHydrolysis ResistanceAcid ResistancOil ResistantAlcohol ResistantDetergent resistantFilled & Reinforced | |||
| Additive | UV-StabilizerHeat Stabilizer | |||
| Processing | Injection | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 37 | |
at 100% strain | *** Mpa | ISO 37 | |
at 300% strain | *** Mpa | ISO 37 | |
Tensile Elongation | |||
Break | *** % | ISO 37 | |
Tear Strength | *** kN/m | ISO 34 | Perpendicular to flow |
Compression Set | *** % | ASTM D 395 | 22h/70°C |
Compression Set | *** % | ASTM D 395 | 72h/23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | 3 second |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Continuous Use Temperature | |||
Long term | *** °C | Internal | Max. Dynamic Service Temperature |
Temperature at Short Circle Operation | *** °C | Internal | Max. Static Service Temperature |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
