Ingeo biopolymer 7001D, a NatureWorks LLC product, is a thermoplastic resin derived from annually renewable resources and is specifically designed for use in injection stretch blow molded (ISBM) bottle applications. Ingeo biopolymer 7001D can be run using conventional ISBM equipment, but processes at lower temperatures than PET and can attain good resolution of mold detail on conventional tooling.
Applications
Injection stretch blow molded (ISBM) bottles for single- or two- stage operations. Potential applications for Ingeo 7001D include:
• Fresh Dairy
• Edible Oils
• Fresh Water
• Health/Beauty/Amenity
| Original Document | Technical Datasheet(English) | |||
| Features | Bio-basedRenewable ResourceDegradableFood Contact | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Injection Stretch Blow Molding | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
210℃/2.16kg | *** g/10 min | ASTM D 1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | ***~*** °C | ASTM D3418 | |
Glass Transition Temperature | ***~*** °C | ASTM D 3418 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Water Vapor Transmission Rate | *** g.mm/m².24hr | ASTM F 1249 | |
Oxygen permeability | *** ml/m2 day | ASTM D 1434 | |
Carbon Dioxide transm. rate | *** cm³/m²/bar/24 hr | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
