Ingeo 4043D – a product from NatureWorks LLC – can be converted into a biaxially oriented film with use temperatures up to 265ºF (130ºC). This film has excellent optics, good machinability and excellent twist and deadfold. These properties make 4043D film an ideal candidate for candy twist wrap and other packaging applications. Additional properties include advantageous barrier to flavor and grease and superior oil resistance.
Polymer Characteristics
4043D polymer is available in pellet form. Drying prior to processing is essential. The polymer is stable in the molten state, provided that the extrusion and drying procedures are followed.
| Original Document | Technical Datasheet(English) | |||
| Features | Good optical propertiesBio-basedRenewable ResourceDegradableFood ContactOil Resistant | |||
| Processing | Film Extrusion | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | ***~*** °C | ASTM D3418 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 1.0 mil film |
Gloss | *** - | ASTM D 1003 | 20º, 1.0 mil film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D882 | MD, 1.0 mil film |
- | *** Mpa | ASTM D882 | TD, 1.0 mil film |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 1.0 mil film |
Break | *** % | ASTM D 882 | TD, 1.0 mil film |
Tensile Modulus | *** Mpa | ASTM D 882 | MD, 1.0 mil film |
Tensile Modulus | *** Mpa | ASTM D 882 | TD, 1.0 mil film |
Elmondorf Tear | *** g/mil | ASTM D 1922 | MD, 1.0 mil film |
Elmondorf Tear | *** g/mil | ASTM D 1922 | TD, 1.0 mil film |
Water Vapor Transmission Rate | *** g.mm/m².24hr | ASTM F 1249 | 1.0 mil film |
Oxygen permeability | *** ml/m2 day | ASTM D 1434 | 1.0 mil film |
Carbon Dioxide transm. rate | *** cm³/m²/bar/24 hr | Internal | 1.0 mil film |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
