This metallocene linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require:
• Superb clarity
• Excellent gloss
• Exceptional toughness
• Outstanding heat seal
Typical blown film applications include:
• Seal layer in coextrusions
• Heavy duty packaging
• Clarity packaging
• Agricultural films
| Original Document | Technical Datasheet(English) | |||
| Additive | Processing Aid | |||
| Processing | Blown Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | ASTM 1894 | 1 mil Blown Film |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 1 mil Blown Film |
Gloss | *** - | ASTM D 2457 | 60°, 1 mil Blown Film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 1 mil Blown Film |
Yield | *** Mpa | ASTM D 882 | TD, 1 mil Blown Film |
Break | *** Mpa | ASTM D 882 | MD, 1 mil Blown Film |
Break | *** Mpa | ASTM D 882 | TD, 1 mil Blown Film |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 1 mil Blown Film |
Break | *** % | ASTM D 882 | TD, 1 mil Blown Film |
Elmondorf Tear | *** g/mil | ASTM D 1922 | MD, 1 mil Blown Film |
Elmondorf Tear | *** g/mil | ASTM D 1922 | TD, 1 mil Blown Film |
Secant Modulus | *** Mpa | ASTM D 882 | 1 % Secant, MD, 1 mil Blown Film |
Secant Modulus | *** Mpa | ASTM D 882 | 1 % Secant, TD, 1 mil Blown Film |
Dart Drop Impact | *** g/mil | ASTM D 1709 | 1 mil Blown Film |
Seal Initiation Temperature | *** ℃ | ASTM F88 | 1 mil Blown Film |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
