This low density polyethylene is tailored for extrusion coating applications that require:
• Excellent processability
• Good WVTR
• Good heat seal
Typical extrusion coating applications may include:
• Liquid packaging
• Cup stock
• Folding carton
• General paper and board coating
| Original Document | Technical Datasheet(English) | |||
| Processing | Extrusion Coating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Melt Temperature(Tm) | *** °C | ASTM D3418 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Water Vapor Transmission Rate | *** g/m²/24 hr | ASTM F 1249 | on coated slip sheet at 14.4 lb/ream or 1.0 mil |
Oxygen permeability | *** ml/m2 day | ASTM D 3985 | on coated slip sheet at 14.4 lb/ream or 1.0 mil |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
