This gas phase, high molecular weight, ethylene-hexene copolymer is tailored for lightweight blow molded parts that require:
• Excellent stiffness to ESCR ratio
• Good impact resistance
• Durability
Typical blow molded applications for 9512H include:
• Oil bottles
• Household and industrial chemical containers
• Personal care product containers
This resin meets these specifications:
• ASTM D4976 - PE 235
• FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per Table 2 of 21 CFR 176.170(c)
| Original Document | Technical Datasheet(English) | |||
| Processing | Blow Molding | |||
| Compliance | ASTM D4976FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | Condition B (100 % Igepal), F50 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 2 in/min, Type IV bar |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 2 in/min, Type IV bar |
Flexural Modulus | *** Mpa | ASTM D790 | Tangent - 16:1 span:depth, 0.5 in/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | Type A, Type I specimen |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
