This metallocene linear low density polyethylene is an ethylene-hexene copolymer tailored for cast film applications that require:
• Superior clarity
• Excellent gloss
• Exceptional toughness
• Outstanding heat seal
Typical cast film applications include:
• Stretch wrap
• Overwrap
• Coextrusions
| Original Document | Technical Datasheet(English) | |||
| Processing | Cast Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | ASTM 1894 | 1 mil cast film |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 1 mil cast film |
Gloss | *** - | ASTM D 2457 | 60°, 1 mil cast film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 1 mil cast film |
Yield | *** Mpa | ASTM D 882 | TD, 1 mil cast film |
Break | *** Mpa | ASTM D 882 | MD, 1 mil cast film |
Break | *** Mpa | ASTM D 882 | TD, 1 mil cast film |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 1 mil cast film |
Break | *** % | ASTM D 882 | TD, 1 mil cast film |
Elmondorf Tear | *** g/mil | ASTM D 1922 | MD, 1 mil cast film |
Elmondorf Tear | *** g/mil | ASTM D 1922 | TD, 1 mil cast film |
Secant Modulus | *** Mpa | ASTM D 882 | 1 % Secant, MD, 1 mil cast film |
Secant Modulus | *** Mpa | ASTM D 882 | 1 % Secant, TD, 1 mil cast film |
Dart Drop Impact | *** g/mil | ASTM D 1709 | 1 mil cast film |
Seal Initiation Temperature | *** ℃ | ASTM F88 | 1 mil cast film |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
