Non-flammable PP, FH51 and FH51G, have a feature of high heat-resistance and rigidity, while FH42P can be used for out-door, for example X-Mas socket, needing heat/weathering resistance. To be applied for Out-Door, the required standard is UL of non-flammability and eco-friendly feature. FH42P Grade keeps non-flammability of UL94 V-0 and fl grade of UL746C, while FH51 exhibits excellent non-flammability of UL94 V-2.
Characteristics
▶ FH51: As non-flammability of UL94 V-2 grade, it is easy to form with excellent fluidity and widely used for electric/electronic parts including X-mas sockets.
▶ FH51G : As non-flammability of UL94 V-2 grade, it is easy to form with excellent fluidity and widely used for, in particular, extension sockets with its high heat resistance and rigidity.
▶ FH42P: As non-flammability of UL94 V-0 grade and eco-friendly feature of UL746C, it is easy to form with excellent fluidity and widely used for out-door with its distinctive heat/light resistance, hydrothermal resistance, and long-term thermal stability.
Applications
▶ X-Mas socket(FH51, FH42P)
▶ Electric parts for In-Door and Out-Door needing non-flammability and weathering resistance (FH51, FH42P)
▶ Extension socket needing high heat-resistance and rigidity (FH51G)
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHeat ResistanceFlame RetardantWeather ResistanceGood Flow | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | 2mm(t) |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 50mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 50mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 50mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
Relative Temperature Index(RTI), Imp | |||
0.75/0.8mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | |||
0.75/0.8mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Str | |||
0.75/0.8mm | *** °C | UL 746B | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-2 | *** mm | UL94 | |
V-2 | *** mm | UL94 | |
Glow Wire Flammability Index(GWFI) | |||
1.6mm | *** °C | IEC 60695-2-12 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
