S1003 is a narrow molecular weight distribution homopolymer polypropylene resin with high stiffness, easy processing and wide application range.
Typical Applications
Processing Method:
Extrusion molding, Injection molding, blown film
Application:
Straw, rope, brush, woven bag, packing tape, container bag, carpet backing, artificial turf, BOPP, thermoforming and various little injection molding parts
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | High Stiffness/RigidityEasy processingHomopolymer | |||
| Processing | InjectionExtrusionBlown Film | |||
| Compliance | FDAGB 4806.6-2016RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | GB/T 1033 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | GB/T 3682 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | GB/T 1040.2 | 50 mm/min |
Break | *** Mpa | GB/T 1040.2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | GB/T 1040.2 | 50 mm/min |
Flexural Modulus | *** Mpa | GB/T 9341 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | GB/T 1043.1 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | GB/T 3398.2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | GB/T 1634.2 | |
Vicat Softening Temperature(VST) | *** °C | GB/T 1633 | A50 |
Melt Temperature(Tm) | *** °C | GB/T 19466.3 | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
