HD5401AA is a hexene high density polyethylene resin with a broad molecular weight distribution, outstanding balance of stiffness, toughness and environmental stress cracking resistance, suitable for producing various blown molding containers of medium volume.
Typical Applications
Blown Molding: Containers (1-60L) for various chemicals (like pesticide, chemical reagent), food (like liquor, condiment, food additives) and daily chemicals
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Processing | Blow Molding | |||
| Compliance | FDAGB 4806.6-2016RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | non-annealed |
Melt Mass Flow Rate(MFR) | |||
190℃/21.6 kg | *** g/10 min | GB/T 3682 | |
Environmental Stress Cracking Resistance | *** Hours | GB/T 1842 | Method B, 10% Igepal，F50 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | GB/T 1040.2 | |
Tensile Elongation | |||
Break | *** % | GB/T 1040.2 | |
Flexural Modulus | *** Mpa | GB/T 9341 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | GB/T 1043.1 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | GB/T 1634.2 | |
Vicat Softening Temperature(VST) | *** °C | GB/T 1633 | A50 |
Melt Temperature(Tm) | *** °C | GB/T 19466.3 | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
