LL0220KJ is a butylene linear low density polyethylene resin with less gels, good optical performance, optimized balance of mechanical properties, excellent smoothness and blocking resistance, and good process-ability, which is widely used in blown film.
LL0220KJ contains 1200 ppm slip agent and 1800 ppm anti-block agent.
Typical Applications
Blown Film: Laminated films, co-extrusion films, mulching films, small shed films, shopping bags, garbage bags, packaging bags, liners, etc.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Additive | Slip agentAntiblock | |||
| Processing | Blown Film | |||
| Compliance | FDAGB 4806.6-2016RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | non-annealed |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | GB/T 3682 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | GB/T 1633 | A50 |
Melt Temperature(Tm) | *** °C | GB/T 19466.3 | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | GB/T 2410 | |
Haze | *** % | GB/T 2410 | |
Gloss | *** % | GB/T 8807 | 45º |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | GB/T 1040.3 | MD |
Yield | *** Mpa | GB/T 1040.3 | TD |
Break | *** Mpa | GB/T 1040.3 | MD |
Break | *** Mpa | GB/T 1040.3 | TD |
Tensile Elongation | |||
Break | *** % | GB/T 1040.3 | MD |
Break | *** % | GB/T 1040.3 | TD |
Elmondorf Tear | *** g | GB/T 16578.2 | MD |
Elmondorf Tear | *** g | GB/T 16578.2 | TD |
Dart Drop Impact | *** g | GB/T 9639.1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
