LL0220AA is a butylene linear low density polyethylene resin with less gels, good optical performance, optimized balance of mechanical properties, high stiffness, and good process-ability, which is widely used in blown film field.
LL0220AA contains no slip agent and anti-block agent.
Typical Applications
Blown Film: Medium strength packaging films, protective films, stretch films, mulching films, laminated films, cast films
Compounding: LV/MV cable thermalplastic jacketing
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Processing | Blown FilmCompounding | |||
| Compliance | FDAGB 4806.6-2016RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | non-annealed |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | GB/T 3682 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | GB/T 1633 | A50 |
Melt Temperature(Tm) | *** °C | GB/T 19466.3 | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | GB/T 2410 | |
Haze | *** % | GB/T 2410 | |
Gloss | *** % | GB/T 8807 | 45º |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | GB/T 1040.3 | MD |
Yield | *** Mpa | GB/T 1040.3 | TD |
Break | *** Mpa | GB/T 1040.3 | MD |
Break | *** Mpa | GB/T 1040.3 | TD |
Tensile Elongation | |||
Break | *** % | GB/T 1040.3 | MD |
Break | *** % | GB/T 1040.3 | TD |
Elmondorf Tear | *** g | GB/T 16578.2 | MD |
Elmondorf Tear | *** g | GB/T 16578.2 | TD |
Dart Drop Impact | *** g | GB/T 9639.1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
