3M™ Dyneon™ Fluoroplastic Powder PFA 6503PBZ is a fluorothermoplastic powder with excellent thermal stability characteristics, designed for use in thin film powder coatings. Typical applications include non-stick surfaces, chemical vessel and tank liners, electrical insulation and low friction applications.
Features and Benefits
• Excellent thermal stability • Excellent electrostatics • Excellent non-stick performance • Outstanding flow and fluidization • Excellent stress crack resistance • Smooth surfaces • Process targets: powder coating • Non-wetting • Heat resistant to 260°C (500°F) • Low friction • Good transparency • Chemical resistant
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedInsulatingLow Friction/WearESCRChemical ResistanceGood Flow | |||
| Appearance | PowderClear/Transparent | |||
| Processing | CoatingElectrostatic/Powder Coating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
372°C/5.0 kg | *** g/10 min | ASTM D1238 | |
Particle Size | *** micrometer | Internal | Median Particle Size |
Bulk(Apparent ) Density | *** g/cm³ | DIN 53466 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** Mpa | ASTM D790 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ASTM D4591 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxygen Index | *** % | ASTM D 2863 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
