Polyvinylidene Fluoride (PVDF) is ideal for multiple applications across a wide array of industries. Widely used in the chemical process industry, wire and cable industry, semiconductor industry, and oil and gas industry, PVDF is also gaining recognition in automotive, building, electronics, pharmaceutical and batteries.
3M™ Dyneon™ PVDF 6008/0001 is easily processed under a variety of conventional thermoplastic conversion techniques, being particularly suitable for extrusion. PVDF 6008/0001 is inherently pure and chemically resistant against a variety of aggressive fluids and solvents. PVDF 6008/0001 exhibits excellent dimensional stability, abrasion resistance and high strength, and maintains its mechanical properties at elevated temperature.
Features and Benefits
• Excellent chemical resistance to a variety of aggressive fluids and solvents • Smooth, anti-fouling surfaces • Good permeation resistance • Injection molding grade • Excellent strength and dimensional stability
| Original Document | Technical Datasheet(English) | |||
| Features | Dimensional StabilityChemical ResistanceAnti-SolventHigh Barrier property/Low permeation | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
230°C/5 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 23°C, 50 mm/min |
Break | *** Mpa | ASTM D638 | 23°C, 50 mm/min |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 23°C, 50 mm/min |
Break | *** % | ASTM D638 | 23°C, 50 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 23°C, 2 mm/min |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | annealing, 4 mm Thick |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 4 mm Thick |
Melt Temperature(Tm) | *** °C | ASTM D3418 | Crystallinity by DSC |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
Oxygen Index | *** % | ASTM D 2863 | Sheet 3 mm Thick |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
