3M™ Dyneon™ PVDF 31508/0003 is a flexible copolymer of VF2 and CTFE, exhibiting very low shrinkage and excellent impact resistance. PVDF 31508/0003 also has a very low brittleness temperature, for excellent low temperature performance. This material is ideal for insulation and buffering materials for wire and cable applications and for tubing. PVDF 31508/0003 has excellent flame and smoke performance, with an LOI of 65. PVDF 31508/0003 is designed for high speed extrusion, and can be processed using a variety of conventional thermoplastic conversion techniques. As with all PVDF grades, PVDF 31508/0003 also possesses very good chemical and temperature resistance
Features and Benefits
• Copolymer of VF2 and CTFE • Ultra-flexible • Very low shrinkage rates • Wide operating temperature window • Processable using a variety of thermoplastic conversion techniques • Excellent low flame and low smoke performance
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturFlame RetardantLow ShrinkageLow CLTEEasy processingLow Smoke Density | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
230°C/5 kg | *** g/10 min | ASTM D 1238 | |
Water Absorption | *** % | ISO 62 | 24hr @ 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | 23°C, 50 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C, 50 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 23°C, 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ASTM D3418 | Crystallinity by DSC |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
Oxygen Index | *** % | ASTM D 2863 | sheet 3 mm Thick |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | 23°C |
Surface Resistivity | *** Ohm | ASTM D257 | 23°C |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
