3M™ Dyneon™ PFE 4131TZ is an incorporated cure high temperature perfluorelastomer (HT PFE). It is designed to meet the challenges of higher temperature applications. It is classified as FFKM per ASTM D1418. Its fully fluorinated backbone structure provides a very broad chemical and thermal stability.
Features and Benefits
• PFE 131TZ compounded with curative for ease in manufacturing • Upper use temperature of 315°C • Excellent compression set resistance • Can be compounded to pass AMS 7257D • Ideal for dry side (thermal processes) semiconductor applications, including plasma, and high temperature CPI and aerospace applications • Low metal ion content with low extractables
| Original Document | Technical Datasheet(English) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Mooney Viscosity | *** MU | Internal | ML (1+10) @ 121°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Compression Set | *** % | ASTM D 395 | 168Hr/232°C, 25% Deformation |
Compression Set | *** % | ASTM D 395 | 168Hr/300°C, 18% Deformation |
Compression Set | *** % | ASTM D 395 | 70Hr/232°C, 25% Deformation |
Compression Set | *** % | ASTM D 395 | 70Hr/300°C, 18% Deformation |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Low Temp. Retraction | *** °C | ASTM D1329 | |
Continuous Use Temperature | |||
Long term | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
