3M™ Dyneon™ Fluoroelastomer FC 2144 is a copolymer of vinylidene fluoride and hexafluoropropylene with proprietary incorporated cure technology.
Features and Benefits
• Medium viscosity • Higher viscosity version of FC 2123 • Excellent mold release • Good hot tear properties essential for demolding complex geometric profiles and parts containing severe undercuts • Good for bonded seals • Process targets: transfer and compression molding, bonding and calendering
Typical Applications:
• Molded goods and products which require good bonding between rubber and metal
| Original Document | Technical Datasheet(English) | |||
| Features | Good AdhesionMold ReleaseMedium viscosity | |||
| Processing | CalenderingCompression Moulding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Mooney Viscosity | *** MU | Internal | ML 1 + 10 @ 121ºC |
Fluorine Content | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Compression Set | *** % | ASTM D1414 | 230°C, 16 hr |
Compression Set | *** % | ASTM D1414 | 260°C, 24 hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Low Temp. Retraction | *** °C | ASTM D1329 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
