3M™ Dyneon™ Peroxide Cure Fluoroelastomer FPO 3820 is a terpolymer of vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene plus cure site monomer.
Features and Benefits:
• High fluorine content • Low viscosity • No metal oxides required for cure • Process targets: injection molding, compression and transfer molding, extrusion, calendaring • Excellent resistance against chemical fluids • Good physical properties right out of the press Typical Applications • Suitable for hoses, such as fuel line hoses and blow-by gas hoses • Molded goods
| Original Document | Technical Datasheet(English) | |||
| Features | Chemical Resistance | |||
| Processing | CalenderingInjectionExtrusionResin Transfer Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Mooney Viscosity | *** MU | Internal | |
Fluorine Content | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | With ZnO |
- | *** Mpa | ASTM D 412 | Without ZnO |
at 100% strain | *** Mpa | ASTM D 412 | With ZnO |
at 100% strain | *** Mpa | ASTM D 412 | Without ZnO |
Tensile Elongation | |||
- | *** % | ASTM D 412 | With ZnO |
- | *** % | ASTM D 412 | Without ZnO |
Compression Set | *** % | VDA 675 218 | 150°C, 22 hr, With ZnO |
Compression Set | *** % | VDA 675 218 | 150°C, 22 hr, Without ZnO |
Compression Set | *** % | ASTM D1414 | 200°C, 70 hr, With ZnO |
Compression Set | *** % | ASTM D1414 | 200°C, 70 hr, Without ZnO |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | With ZnO |
Shore A hardness | *** A | ASTM D 2240 | Without ZnO |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Glass Transition Temperature | *** °C | Internal | |
Low Temp. Retraction | *** °C | ASTM D1329 | Without ZnO |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
