TECAFLON PTFE natural - Stock Shapes (rods, plates, tubes)
Main features:
-very good chemical resistance
-inherent flame retardant
-continuous service temperature up to 260 °C
-good UV and weather resistance
-very good electrical insulation
-very good slide and wear properties
Target Industries:
-aircraft and aerospace technology
-chemical technology
-cryogenic engineering
-food technology
-mechanical engineering
-semiconductor technology
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceFlame RetardantInsulatingWear/Abrasion ResistanceLow Friction/WearUV StabiltiyWeather ResistanceChemical Resistance | |||
| Appearance | SheetRodpipeWhite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Water Absorption | *** % | ASTM D570 | 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D4894 | |
Tensile Elongation | |||
Break | *** % | ASTM D4894 | |
Compressive Strength | *** Mpa | ASTM D 695 | 1% strain |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ASTM D 696 | 23-100°C, long. |
Glass Transition Temperature | *** °C | ISO 11357 | |
Thermal Conductivity | *** W/(m K) | ASTM C 177 | |
Continuous Use Temperature | |||
Long term | *** °C | Internal | |
Temperature at Short Circle Operation | *** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | IEC 60695-11-10 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Surface Resistivity | *** Ohm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
50/60 Hz | *** - | ASTM D150 | 50-109Hz |
100Hz | *** - | ASTM D 150 | 50-109Hz |
Dielectric Strength | *** kV/mm | ASTM D149 | In air, 0.125mm thick |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
