A soft, color thermoplastic vulcanized (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties, chemical resistance，elasticity , designed for injection applications. This grade of TPV can be processed on conventional thermoplastics equipment for injection molding. It is polyolefin based and completely recyclable.
| Original Document | Technical Datasheet(English) | |||
| Features | Chemical ResistanceThermoplastic ElastomerSoft | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/5 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294 | |
Across Flow | *** % | ISO 294 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 37 | Type 1 dumbbell, 500mm/minute |
at 100% strain | *** Mpa | ISO 37 | Type 1 dumbbell, 500mm/minute |
Tensile Elongation | |||
Break | *** % | ISO 37 | Type 1 dumbbell, 500mm/minute |
Tear Strength | *** kN/m | ISO 34 | Method B, angle die,500 mm/minute |
Compression Set | *** % | ISO 815 | 125℃,70hr,Type A |
Compression Set | *** % | ISO 815 | 70℃,22hr,Type A |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ISO 812 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | 15 sec, 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Continuous Use Temperature | |||
Long term | ***~*** °C | Internal | |
Temperature at Short Circle Operation | ***~*** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Burning Rate | *** mm/min | GB/T 8410 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
