| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| GB/T 1033 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | | | |
- |
*** Mpa | GB/T 528 | parallel flow direction, 23°C |
at 200% strain |
*** Mpa | GB/T528 | parallel flow direction, 23°C |
Tensile Elongation | | | |
Break |
*** % | GB/T 528 | parallel flow direction, 23°C |
Tear Strength |
*** kN/m
| GB/T 529 | vertical flow direction, 23°C |
Compression Set |
*** %
| GB/T 7759.1 | 23°C, 72h |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature |
*** °C
| ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness |
*** A
| GB/T 531 | 10 sec, 23°C |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
HB |
*** mm | UL94 | |
HB |
*** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
*** Ohm-cm
| GB/T1410 | |
Dielectric Constant(Permittivity) | | | |
- |
*** - | ASTM D150 | 23°C |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Hardness(Heat Aging) |
*** %
| GB/T3512 | change, 100°C, 72h |
Tensile Strength(Heat Aging) |
*** %
| GB/T3512 | change, 100°C, 72h |
Elonggation(Heat Aging) |
*** %
| GB/T3512 | change, 100°C, 72h |
Hydrolytic Stability | | | |
Tensile Strength |
*** Mpa | GB/T3512 | boiling water, 24h |
Tensile Elongation |
*** % | GB/T3512 | boiling water, 24h |
Change in Volume |
*** %
| GB/T1690 | change, 23°C, 72h, 46# oil |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
