DuPont™ Vespel® CR-6110 shapes are the latest carbon-fiber filled thermoplastic fluoropolymer that have demonstrated outstanding performance in aggressive wet chemical / plasma conditions and elevated temperatures.
Customers report improved preventative maintenance cycles by switching to Vespel® CR-6110 in wafer cleaning and resist stripping operations. It has also demonstrated good ultraviolet (UV) resistance in Flat Panel Display applications. In dry plasma applications, Vespel® CR-6110 has been used as a thermal insulator and bearing.
Vespel® CR-6110 is available upon request in wide variety of shapes (plaque, sheet, rod, ring, tube) and can also be machined for custom parts in various applications.
| Original Document | Technical Datasheet(English) | |||
| Features | UV StabiltiyChemical ResistanceFilled & Reinforced | |||
| Appearance | SheetRodpipeParts/ Shapes | |||
| Reinforced | Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23 °C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 23 °C, x-y Direction |
Tensile Modulus | *** Mpa | ASTM D638 | 23 °C, z Direction |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 23 °C, x-y Direction |
- | *** Mpa | ASTM D 638 | 23 °C, z Direction |
Tensile Elongation | |||
- | *** % | ASTM D 638 | 23 °C, x-y Direction |
- | *** % | ASTM D 638 | 23 °C, z Direction |
Flexural Modulus | *** Mpa | ASTM D790 | 23 °C, x-y Direction |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 23 °C, x-y Direction |
Compressive Modulus | *** Mpa | ASTM D 695 | 23 °C, x-y Direction |
Compressive Modulus | *** Mpa | ASTM D 695 | 23 °C, x-y Direction |
Compressive Modulus | *** Mpa | ASTM D 695 | 260 °C, x-y Direction |
Compressive Modulus | *** Mpa | ASTM D 695 | 260 °C, z Direction |
Compressive Strength | *** Mpa | ASTM D 695 | 23 °C, x-y Direction |
Compressive Strength | *** Mpa | ASTM D 695 | 23 °C, z Direction |
Compressive Strength | *** Mpa | ASTM D 695 | 260 °C, x-y Direction |
Compressive Strength | *** Mpa | ASTM D 695 | 260 °C, x-y Direction |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vickers | *** - | ASTM E384 | 1kgf, x-y Direction |
Vickers | *** - | ASTM E384 | 1kgf, z Direction |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | x-y Direction |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/°C | ASTM D E831 | 149 -204 °C,z Direction |
- | *** E-6/°C | ASTM D E831 | 204 -260 °C, z Direction |
- | *** E-6/°C | ASTM D E831 | 23-260 °C, x-y Direction |
- | *** E-6/°C | ASTM D E831 | 35 – 149 °C, z Direction |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | JIS K7194 | x-y Direction |
Volume Resistivity | *** Ohm-cm | JIS K7194 | z Direction |
Surface Resistivity | *** Ohm | JIS K7194 | x-y Direction |
Surface Resistivity | *** Ohm | JIS K7194 | z Direction |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
