SABIC PP FPC70T is a polypropylene impact copolymer designed for high speed injection molding process. It contains nucleating agent and antistatic agent and is free of phthalate. It has very high flowability, good stiffness and toughness balance, and good organoleptic performance.
It is especially suitable for high speed production of thin wall packaging that require good low temperature toughness.
TYPICAL APPLICATIONS
SABIC® PP FPC70T is suitable for production of food contact thin wall packaging which includes packaging for frozen food, ambient food and dairy products (e.g. yoghurt, butter, cheese, etc.).
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Good StiffnessGood Impact ResistanceHigh Impact at Low TemperaturFast Cycle TimeLow OdorFood ContactPhthalates/Plasticizer free (PAEs)UV StabiltiyHigh FlowCopolymerNucleated | |||
| Additive | Antistatic AdditiveNucleating Agent | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | 1% Secant |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179-1 | |
23℃ (73℉) | *** kJ/m² | ISO 179-1 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
