SABIC PP 77MK40T is a medium fluidity polypropylene impact copolymer with high impact strength and high stiffness.
It contains nucleating & antistatic agents.
TYPICAL APPLICATIONS
SABIC® PP 77MK40T can be used for auto interior or exterior, home appliance parts, housewares and compounding.
| Original Document | Technical Datasheet(Chinese) Technical Datasheet(Chinese) | |||
| Features | High Stiffness/RigidityHigh ImpactMedium viscosityCopolymerNucleated | |||
| Additive | Antistatic AdditiveNucleating Agent | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | 1% Secant |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179-1 | |
23℃ (73℉) | *** kJ/m² | ISO 179-1 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
