SABIC PP 527K is a leading grade typically used for products in thermoforming. Tailoring of the polymer architecture combined with effective nucleation resulted in a good balance of very high stiffness combined with excellent transparency.
Its high crystallisation temperature is ideally suited for further line speed improvements. Moreover it is formulated with a combined processing and antistatic additive package.
Application:
SABIC PP 527K is typically used in packaging for Fruit, Vegetables, Meat, Fish, Poultry and Ambient Food packaging.
Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.sabic.com.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
IMDS 7172624
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHomopolymerNucleated | |||
| Additive | Antistatic AdditiveNucleating Agent | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Thermoforming | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-2 | 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | 80*10*4mm |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | 80*10*4mm |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B | 120°C/h, at 50 N (VST/B) |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A | 120°C/h, at 10 N (VST/A) |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
