TYPE:
Polyester-based grade Extrusion and injection molding grade
FEATURES:
Excellent mechanical properties, high abrasion resistance, wear resistance, short cycle times
Applications:
Wire & Cable, tubes, conveyor belt, rollers, seals, screenpacks, etc
| Original Document | Technical Datasheet(English) | |||
| Features | Wear/Abrasion ResistanceFast Cycle Time | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Abrasion resistance | *** mm³ | ISO 4649 | DIN Abrasion |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 22 h; 70 o C |
Compression Set | *** % | ASTM D 395 | 24 h; 23 oC |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Glass Transition Temperature | *** °C | ASTM D 3418 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
