Modified PVC
FEATURES:
- UL94 V-0@1.5mm-3.0mm, 5VA@2.0mm
- Good mechanical strength
- Good heat aging resistance
- Good surface
- Good processing ability
APPLICATIONS:
- Injection molding
- Electric appliance and components
- Power switch socket
- Telecommunications
- Pipe fitting
| Original Document | Technical Datasheet(English) | |||
| Features | Good Heat AgingFlame RetardantGood SurfaceEasy processing | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23℃ |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | 23℃ |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 50mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 50mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 2mm/min |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 2mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.2mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
Shore D hardness | *** D | ASTM D 2240 | 5sec |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 50N |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
V-0 | *** mm | UL94 | |
5VA | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | ***~*** Ohm-cm | IEC 60093 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
