Flame Retardant & Glass Fiber Reinforced PC
FEATURES:
- High stiffness, high mechanical properties
- Good surface, low warpage
- Good dimension stability, suit for precision molding
- Designed for applications requiring high rigidity and high heat resistance
APPLICATIONS:
- Imaging equipment housing
- OA equipment interior frame
- Electrical equipment
- Computer plug parts
- CD-ROM, DVD interior bracket
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceFlame RetardantGood SurfaceDimensional StabilityLow WarpageFilled & Reinforced | |||
| Reinforced | 40% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23℃ |
Mold Shrinkage | |||
- | ***~*** % | ISO 2577 | |
Filled/Ash | *** % | ISO 3451 | 825℃,40mi |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | 10mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 10mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2mm/min |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 2mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180 | 4mm |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180 | 4mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | 4mm |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 60093 | |
Dielectric Strength | *** kV/mm | IEC 60243-1 | 1.6mm, in oil |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
