Thermoplastic polyurethane, Powder, white
Main features:
Powder for laser sintering (additive manufacturing). Elastic parts with high strength and high abrasive resistance.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | High StrengthGood FlexibilityWear/Abrasion Resistance | |||
| Appearance | PowderWhite | |||
| Processing | Selective Laser Sintering(SLS) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
190℃/2.16 kg | *** cm³/10min | ISO 1133 | |
Mold Shrinkage | |||
- | *** % | Internal | |
Water Absorption | *** % | ISO 62 | |
Particle Size | *** micrometer | Internal | d10 |
Particle Size | *** micrometer | Internal | d50 |
Particle Size | *** micrometer | Internal | d90 |
Bulk(Apparent ) Density | *** g/cm³ | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | in-plane |
- | *** Mpa | DIN 53504 | out-of-plane |
Tensile Elongation | |||
- | *** % | DIN 53504 | in-plane |
- | *** % | DIN 53504 | out-of-plane |
Flexural Modulus | *** Mpa | ISO 6721-1 | DMA: 20°C, 1Hz / 2°C/min |
Flexural Modulus | *** Mpa | ISO 6721-1 | DMA: 60°C, 1Hz / 2°C/min |
Poisson Ratio | *** - | - | Hencky, 0.2 mm/s |
Compressive Modulus | *** Mpa | ISO 604 | in-plane |
Compressive Modulus | *** Mpa | ISO 604 | out-of-plane |
Compressive Strength | *** Mpa | ISO 604 | in-plane |
Compressive Strength | *** Mpa | ISO 604 | out-of-plane |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A | |
Melt Temperature(Tm) | *** °C | ISO 11357 | DSC |
Glass Transition Temperature | *** °C | ISO 11357 | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
