LFT PP+20GF
Key feature:
High Toughness; High flowability; Good blastability
Application:
Main instrument panel frame; Auxiliary instrument panel frame
| Original Document | Technical Datasheet(Chinese&English) | |||
| Features | Good ToughnessHigh FlowFilled & Reinforced | |||
| Reinforced | 20% Long Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294 | |
Across Flow | *** % | ISO 294 | |
Filled/Ash | *** % | ISO 1172 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | I type sample,50mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527 | I type sample,50mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 23℃,10mm/min |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 23℃,10mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2 | |
Melt Temperature(Tm) | *** °C | ISO 3146 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
