TECAFIL PEEK VX blue - Filament
Main features
-Standard spool body: OD Ø 200mm, width 55mm, Take up Ø52mm
| Original Document | Technical Datasheet(English) | |||
| Appearance | FilamentBlue | |||
| Processing | 3D Printing | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1 | 50 mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527-1 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-1 | 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | DIN 53765 | |
Glass Transition Temperature | *** °C | DIN 53765 | |
Continuous Use Temperature | |||
Long term | *** °C | Internal | long term |
Temperature at Short Circle Operation | *** °C | Internal | |
Processing Temperature | ***~*** °C | - | Material temperature |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
