TECAFIL PEEK LDS black - Filament
Main features
-developed for the LPKF-LDS® process; Standard spool body: OD Ø 200mm, width 55mm, Take up Ø52mm
Target Industries
-electrical engineering; mechanical engineering; medical technology
| Original Document | Technical Datasheet(English) | |||
| Features | Laser Direct StructuringFilled & Reinforced | |||
| Appearance | FilamentBlack | |||
| Processing | 3D Printing | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
380°C/10 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | |
Across Flow | *** % | ISO 294-4 | |
Water Absorption | *** % | ISO 62 | 23°C, 50% r.h. |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1 | 1mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527-1 | 50mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-1 | 50mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75/A | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | 200 - 260 °C |
Flow | *** E-6/K | ISO 11359-1/-2 | 23 - 100 °C |
Flow | *** E-6/K | ISO 11359-1/-2 | 260 - 300 °C |
Across Flow | *** E-6/K | ISO 11359-1/-2 | 200 - 260 °C |
Across Flow | *** E-6/K | ISO 11359-1/-2 | 23 - 100 °C |
Across Flow | *** E-6/K | ISO 11359-1/-2 | 260 - 300 °C |
Melt Temperature(Tm) | *** °C | DIN 53765 | |
Glass Transition Temperature | *** °C | DIN 53765 | |
Thermal Diffusivity | *** mm²/s | DIN EN 821 | in-plane |
Thermal Diffusivity | *** mm²/s | DIN EN 821 | through-plane |
Continuous Use Temperature | |||
Long term | *** °C | Internal | long term |
Temperature at Short Circle Operation | *** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | IEC 60695-11-10 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 61340-2-3 | |
Surface Resistivity | *** Ohm | IEC 61340-2-3 | |
Dielectric Constant(Permittivity) | |||
1 kHz | *** - | DIN 53483-1 | |
Dissipation Factor | |||
1 kHz | *** E-4 | DIN 53483-1 | |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 | |
Dielectric Strength | *** kV/mm | IEC 60243-1 | 70 mm x 70 mm x 3 mm |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Adhesion Strength | *** N/mm² | - | metal path |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
