TECAST® T natural - Stock Shapes (rods, plates, tubes)
Main features
-good wear properties; good mechanical properties; high fatigue strength; good damping; high mechanical load capacity; resistant to many oils, greases and fuels
Target Industries
-construction industry; gear manufacturing; oil and gas industry; conveyor technology; agricultural machinery; heavy duty industry; food engineering; food processing; mining industry
| Original Document | Technical Datasheet(English) | |||
| Features | Fatigue ResistantWear/Abrasion ResistanceFuels ResistantOil ResistantAntivibration/damping | |||
| Appearance | SheetRodpipeNatural ColorWhite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
Moisture /Humidity Absorption | *** % | ASTM D 570 | saturation, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 23°C |
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Coefficient of Friction | *** - | ASTM D 3702 | Dynamic, 40 psi, 50 fpm |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM D 3702 | Against Steel, 40 psi, 50 fpm |
Compressive Modulus | *** psi | ASTM D 695 | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °F | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Specific Heat | *** J/g-°C | - | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Melt Temperature(Tm) | *** °F | ASTM D 2133 | |
Thermal Conductivity | *** W/(m K) | - | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Long Term |
Temperature at Short Circle Operation | *** °F | Internal | Intermittent |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Surface Resistivity | *** Ohm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 23°C, 50% RH |
Dielectric Strength | *** kV/in | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
