TECASINT 2021 black - Stock Shapes (rods, plates, tubes)
Main features
-very good slide and wear properties; very good thermal stability; high thermal and mechanical capacity; good chemical resistance; resistance against high energy radiation; high creep resistance; sensitive to hydrolysis in higher thermal range
Target Industries
-automotive industry; aircraft and aerospace technology; cryogenic engineering; conveyor technology ;hot glass technology ;mechanical engineering; precision engineering
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedWear/Abrasion ResistanceLow Friction/WearCreep ResistantGamma ResistanceChemical Resistance | |||
| Appearance | SheetRodpipeBlack | |||
| Reinforced | 15% Graphite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ISO 179/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Long Term |
Temperature at Short Circle Operation | *** °F | Internal | Intermittent |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
