TECAPET white - Stock Shapes (rods, plates, tubes)
Main features
-very good chemical resistance; resistent to cleaning agents; excellent wear properties; excellent strength and stiffness; low moisture absorption; improved surface hardness; resistance against high energy radiation
Target Industries
-food engineering; food processing; engineering for beverage filling systems; packaging and paper machinery; semiconductor technology; printing machines; mechanical engineering; pharmaceutical industry
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessWear/Abrasion ResistanceGamma ResistanceChemical ResistanceDetergent resistantLow Moisture Absorption | |||
| Appearance | SheetRodpipeWhite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
Moisture /Humidity Absorption | *** % | ASTM D 570 | saturation, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 23°C |
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Coefficient of Friction | *** - | ASTM D 3702 | Dynamic, 40 psi, 50 fpm |
Coefficient of Friction | *** - | ASTM D 3702 | Static |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM D 3702 | Against Steel, 40 psi, 50 fpm |
Compressive Modulus | *** psi | ASTM D 695 | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | 23°C |
Rockwell R | *** R | ASTM D785 | 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °F | ASTM D648 | Intermittent |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Specific Heat | *** J/g-°C | - | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Melt Temperature(Tm) | *** °F | Internal | |
Thermal Conductivity | *** W/(m K) | - | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Intermittent |
Long term | *** °F | Internal | Long Term |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 23°C, 50% RH |
Dissipation Factor | |||
60 Hz | *** E-4 | ASTM D 150 | 23°C |
Dielectric Strength | *** kV/in | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
