TECAPEEK® PVX black - Stock Shapes (rods, plates, tubes)
Main features
-good heat deflection temperature; high creep resistance; good slide and wear properties; hydrolysis and superheated steam resistant; inherent flame resistance; excellent chemical resistance
Target Industries
-mechanical engineering; chemical technology; conveyor technology; automotive industry; textile industry; precision engineering; aircraft and aerospace technology
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceFlame RetardantWear/Abrasion ResistanceLow Friction/WearCreep ResistantSteam ResistantChemical ResistanceHydrolysis ResistanceFilled & Reinforced | |||
| Appearance | SheetRodpipeOpaque ColorBlack | |||
| Reinforced | Carbon FiberPTFEGraphiteCarbon Fiber+Graphite+PTFE | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ISO 62 | saturation, 23°C |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C, Tangent |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Coefficient of Friction | *** - | ASTM D 3702 | 20°C, Static , 40 psi |
Coefficient of Friction | *** - | ASTM D 3702 | 20°C,Dynamic 40 psi 50 fpm |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM D 3702 | 20°C, 40 psi, 50 fpm |
PV Limit | *** psi·fpm | ASTM D3702 | 20°C |
Compressive Modulus | *** psi | ASTM D 695 | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | < Tg, along fllow |
Melt Temperature(Tm) | *** °F | Internal | |
Thermal Conductivity | *** W/(m K) | ISO 22007-4 | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Long Term |
Temperature at Short Circle Operation | *** °F | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | *** Ohm | ASTM D257 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
