TECAPEEK IM CF30 black - Stock Shapes (rods, plates, tubes)
Main features
-very good chemical resistance; good heat deflection temperature; inherent flame resistance; hydrolysis and superheated steam resistant; very high stiffness; very high creep resistant ;high dimensional stability; resistance against high energy radiation
Target Industries
-oil and gas industry ;aircraft and aerospace technology; automotive industry; conveyor technology; mechanical engineering; chemical plant engineering
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHeat ResistanceFlame RetardantDimensional StabilityCreep ResistantGamma ResistanceSteam ResistantChemical ResistanceHydrolysis ResistanceFilled & Reinforced | |||
| Appearance | SheetRodpipeBlack | |||
| Reinforced | 30% Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C, 1% Sec, |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Coefficient of Friction | *** - | ASTM D 3702 | 20°C |
PV Limit | *** psi·fpm | Internal | 68°F, 1200 in/min |
Shear Strength | *** psi | Internal | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | 1/4" |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Melt Temperature(Tm) | *** °F | Internal | |
Thermal Conductivity | *** W/(m K) | ASTM C 177 | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Long Term |
Temperature at Short Circle Operation | *** °F | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
