TECAPEEK ® GF30 natural - Stock Shapes (rods, plates, tubes)
Main features
-good heat deflection temperature; very good chemical resistance; very high creep resistant; hydrolysis and superheated steam resistant; inherent flame resistance; very high stiffness; high dimensional stability; resistance against high energy radiation
Target Industries
-agricultural machinery; Aircraft and Aerospace Interiors; aircraft and aerospace technology; food processing; food engineering; automotive industry; electrical engineering; chemical plant engineering; mechanical engineering; conveyor technology
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHeat ResistanceFlame RetardantDimensional StabilityCreep ResistantGamma ResistanceSteam ResistantChemical ResistanceHydrolysis ResistanceFilled & Reinforced | |||
| Appearance | SheetRodpipeNatural ColorOpaque Color | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
Moisture /Humidity Absorption | *** % | ASTM D 570 | saturation, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C, 1% Sec, |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Break | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Coefficient of Friction | *** - | ASTM D 3702 | 20°C, Dynamic, 40 psi, 50 fpm |
Coefficient of Friction | *** - | ASTM D 3702 | 20°C, Static, 50 psi |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM D 3702 | 20°C, 40 psi, 50 fpm |
Shear Strength | *** psi | Internal | 23°C |
Compressive Modulus | *** psi | ASTM D 695 | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | < Tg, along flow |
Melt Temperature(Tm) | *** °F | Internal | |
Thermal Conductivity | *** W/(m K) | ISO 22007-4 | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Long Term |
Temperature at Short Circle Operation | *** °F | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | 23°C |
Surface Resistivity | *** Ohm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
1 kHz | *** - | IEC 60250 | 23°C |
Dissipation Factor | |||
1MHz | *** E-4 | IEC 60250 | 23°C |
Dielectric Strength | *** kV/in | IEC 60243-1 | 0.1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
