TECAPAI® CM XP440 black-green - Stock Shapes (rods, plates, tubes)
Main features
-excellent wear properties; very good thermal stability; excellent dimensional stability; good machinability
Target Industries
-oil and gas industry ;chemical and refinery industry; chemical plant engineering; process engineering; aircraft and aerospace technology
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedFlame RetardantWear/Abrasion ResistanceLow Friction/WearDimensional Stability | |||
| Appearance | SheetRodpipeGreen | |||
| Reinforced | PTFEGraphite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hr immersion |
Moisture /Humidity Absorption | *** % | ASTM D 570 | saturation |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | |
Tensile Strength | |||
Break | *** psi | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** psi | ASTM D790 | |
Flexural Strength | |||
- | *** psi | ASTM D790 | |
Coefficient of Friction | *** - | ASTM 1894 | dynamic |
Coefficient of Friction | *** - | ASTM 1894 | static |
PV Limit | *** psi·fpm | ASTM D3702 | |
Compressive Modulus | *** psi | ASTM D 695 | |
Compressive Strength | *** psi | ASTM D 695 | 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** ft·lb/in | ASTM D 256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D E831 | -40-150 °C |
Glass Transition Temperature | *** °F | ASTM D 3418 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
