TECAPAI® CM XP403 green - Stock Shapes (rods, plates, tubes)
Main features
-good wear properties; excellent strength and stiffness; excellent dimensional stability ;very good thermal stability; excellent chemical resistance
Target Industries
-electronics; aircraft and aerospace technology; oil and gas industry; chemical and refinery industry; process engineering
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessGood Impact ResistanceHeat StabilizedFlame RetardantWear/Abrasion ResistanceDimensional StabilityChemical Resistance | |||
| Appearance | SheetRodpipeGreen | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hr immersion |
Moisture /Humidity Absorption | *** % | ASTM D 570 | saturation |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | |
Tensile Strength | |||
Break | *** psi | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** psi | ASTM D790 | |
Flexural Strength | |||
- | *** psi | ASTM D790 | |
Coefficient of Friction | *** - | ASTM 1894 | dynamic |
Coefficient of Friction | *** - | ASTM 1894 | static |
PV Limit | *** psi·fpm | ASTM D3702 | |
Compressive Modulus | *** psi | ASTM D 695 | |
Compressive Strength | *** psi | ASTM D 695 | 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** ft·lb/in | ASTM D 256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D E831 | -40-150 °C |
Glass Transition Temperature | *** °F | ASTM D 3418 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | *** Ohm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 | |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D150 | |
Dielectric Strength | *** kV/in | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
