TECAMID 66 GF15 FR black - Stock Shapes (rods, plates, tubes)
Main features
-resistant to many oils, greases and fuels
-high strength
Target Industries
-Aircraft and Aerospace Interiors
-aircraft and aerospace technology
-mechanical engineering
-transportation
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthFlame RetardantHalogen FreeFuels ResistantOil ResistantFilled & Reinforced | |||
| Additive | Flame Retardant | |||
| Appearance | SheetRodpipeBlack | |||
| Reinforced | 15% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Compressive Modulus | *** psi | ASTM D 695 | |
Compressive Strength | *** psi | ASTM D 695 | 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °F | Internal | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Intermittent |
Long term | *** °F | Internal | Long Term |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
NBS Smoke Density | *** - | FAR 25,AppF | |
Vertical Burn | *** cm | FAR 25.853 | |
Toxicity | *** - | BSS 7239/ATS 1000/ABD 0031 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
