TECAFORM® AH SD natural - Stock Shapes (rods, plates, tubes)
Main features
-non-sloughing; easy to machine; good wear properties; good chemical resistance; good mechanical properties; antistatic
Target Industries
-aircraft and aerospace technology; protection of electronics; computer technology; explosion protection; mining industry; business machines; conveyor technology
| Original Document | Technical Datasheet(English) | |||
| Features | Anti-StaticWear/Abrasion ResistanceChemical ResistanceCopolymer | |||
| Additive | Antistatic Additive | |||
| Appearance | SheetRodpipeOpaque ColorWhite | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 23°C |
Break | *** % | ASTM D638 | |
Flexural Modulus | *** psi | ASTM D790 | |
Flexural Strength | |||
- | *** psi | ASTM D790 | |
Coefficient of Friction | *** - | ASTM D 3702 | Dynamic |
Coefficient of Friction | *** - | ASTM D 3702 | Static |
Compressive Modulus | *** psi | ASTM D 695 | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Melt Temperature(Tm) | *** °F | Internal | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Long Term |
Temperature at Short Circle Operation | *** °F | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | ***~*** Ohm | ASTM D257 | |
Dielectric Strength | *** kV/in | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
