TECAFORM® AH black - Stock Shapes (rods, plates, tubes)
Main features
-good wear properties; low water absorption; good chemical resistance; easy to machine; high dimensional stability
Target Industries
-construction industry; agricultural machinery; automotive industry; food engineering; conveyor technology; gear manufacturing; heavy duty industry; packaging and paper machinery; process engineering
| Original Document | Technical Datasheet(English) | |||
| Features | Wear/Abrasion ResistanceDimensional StabilityChemical ResistanceCopolymerLow Moisture Absorption | |||
| Appearance | SheetRodpipeBlack | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
Moisture /Humidity Absorption | *** % | ASTM D 570 | saturation, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 23°C |
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Coefficient of Friction | *** - | ASTM D 3702 | Dynamic 40 psi, 50 fpm |
Wear Factor | *** E-10 in3·min/ft·lb·hr | ASTM D 3702 | 40 psi, 50 fpm |
Compressive Modulus | *** psi | ASTM D 695 | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 10% strain |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 5% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | 23°C |
Rockwell R | *** R | ASTM D785 | 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °F | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Melt Temperature(Tm) | *** °F | Internal | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Intermittent |
Long term | *** °F | Internal | Long Term |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 23°C, 50% RH |
Dissipation Factor | |||
60 Hz | *** E-4 | ASTM D 150 | 23°C |
Dielectric Strength | *** kV/in | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
