Radel® 5500 green (TECASON® P MT) - Stock Shapes (rods, plates, tubes)
Main features
-resistant to autoclaving
-biocompatible
-compliant with cytoxicity according to ISO 10993-5
-meets requirements for USP Class VI
-excellent impact strength
Target Industries
-medical technology
-pharmaceutical industry
| Original Document | Technical Datasheet(English) | |||
| Features | Good Impact ResistanceFlame RetardantMedical Application/Health CareBiocompatibleSteam ResistantAutoclave Sterilizable | |||
| Appearance | SheetRodpipeGreen | |||
| Compliance | ISO10993USP Class VI | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
Moisture /Humidity Absorption | *** % | ASTM D 570 | saturation, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Compressive Modulus | *** psi | ASTM D 695 | |
Compressive Strength | *** psi | ASTM D 695 | 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °F | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Vicat Softening Temperature(VST) | *** °F | Internal | |
Specific Heat | *** J/g-°C | - | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Intermittent |
Long term | *** °F | Internal | Long Term |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 23°C, 50% RH |
Dielectric Strength | *** kV/in | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
